OriginLab Corporation - Data Analysis and Graphing Software - 2D graphs, 3D graphs, Contour Plots, Statistical Charts, Data Exploration, Statistics, Curve Fitting, Signal Processing, and Peak Analysis                     
 
Skip Navigation Links
All BooksExpand All Books
Quick HelpExpand Quick Help
Licensing and InstallationExpand Licensing and Installation

6.9 FAQ-10 How can I change 64bit Origin to 32bit Origin?

Last Update: 10/14/2016

If you have installed 64-bit Origin but need to run 32-bit Origin for certain operations, you can change your installed Origin into the 32-bit application as follows:

  1. Close Origin(Pro) 2017 if it is open.
  2. Click the Windows Start button and select Programs | OriginLab | Origin 2017 | Origin(Pro) 2017 Add or Remove Files. This starts the InstallShield wizard.
  3. Select the Modify radio button and click Next.
  4. Click Yes when asked if you would like to change your serial number.
  5. The Customer Information page appears with Serial Number filled. Click Next.
  6. On the Choose 32 bit, 64 bit, or both page, choose 32 bit Origin or Both 32 bit and 64 bit Origin. If Both 32 bit and 64 bit Origin is selected, you will have two Origin program icons (32 and 64 bit, respectively) in the Start|Programs | OriginLab menu.
  7. Click Next and complete the Modify process. Click Finish when done.

Keywords:install, 32-bit, 64-bit, modify, change, setup

 

© OriginLab Corporation. All rights reserved.