The Origin Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ | Send File to Tech support
 All Forums  Origin Forum  Origin Forum  Double x-axes New Topic  Reply to Topic  Printer Friendly
Author  Topic

2 Posts

 Posted - 04/07/2012 :  08:15:05 AM Hello,I am using Origin ver8. I am trying to plot 1/T power 1/4 versus resistivity along y-axis.Here T is the temperature. But at the same time, the corresponding T should me indicated in the top x-axis with the same interval of data as in 1/T power 1/4. I tried many possible roots. But nothing worked out. Please suggets some ways to solve this problem. Expecting possible solutions.Thanks in advance.yasodha

China
143 Posts

 Posted - 04/09/2012 :  11:31:27 PM Hi, You may do the following:1, plot a graph with your XY data (in which X is the (1/T)^(1/4) and Y is the resistivity), suppose this is graph 1;2, double click on the x axis in graph1 to bring up the axis dialog, go to "Title&Format" tab;3, select the "top" axis and check the "show axis and ticks" box, click "apply" and the top X axis should be shown in the graph(but without tick labels yet);4, go to the "Tick Labels" tab, for the top axis, check the box before "Show Major Labels", to show the major labels as numeric.5, close the axis dialog, and go to the command window; (Normally it should be open when you launched your origin, but if it is not, you may open it by choosing "Window:Command Window" or use the short key "Alt+3")6, in the command window, use the following script:`layer.x2.label.formula\$ = "1/(x^4)"`This will place labels on the top X axis, at the same positions corresponding to labels in the bottom X axis, and these new labels will represent values that are computed using the specified formula. And the formula "1/(x^4)" is the one you used to calculate T value from (1/T)^(1/4).At last, you should have a plot similar to the following figure, Hope this information helps!KathyOriginlab Edited by - Kathy_Wang on 04/09/2012 11:33:39 PM

2 Posts

 Posted - 04/14/2012 :  10:48:38 PM Wow! Thanks a lot .Your suggestion worked out. I could get it easily.Thanks a lot again .yasodha
Topic
 New Topic  Reply to Topic  Printer Friendly Jump To: Select Forum Origin Forum       Origin Viewer and Orglab Forum       Origin Forum Origin Forum for Programming       LabTalk Forum       Forum for Origin C       Forum for Automation Server/COM and LabVIEW Japanese Origin Forum       Origin日本語フォーラム (Japanese Origin Forum) Origin on Linux       The Origin on Linux Forum Private Forums       Distributor Forum  -------------------- Home Active Topics Frequently Asked Questions Member Information Search Page
 The Origin Forum © 2008 Originlab Corporation